Each Mod Lane can now loop at its own length, independently of the channel’s notes. Lane lengths travel with saved patterns, cues and Sets, and automation exports include their active cycles.
Moving a Mod Dial now carries its programmed mod values with it, preserving their relative offsets even when values reach the ends of the range and come back.
Mod locks on a hit now follow that hit’s Chance and Condition, using the same roll as the note. Sample & Hold keeps the last lock that actually played; automation exports follow the same rules.
Pattern saving now includes Mod Lane values, Mod Dials and independent lane lengths. New patterns use the Drum Rack name, keep a save date and Ideal BPM, and show a Pattern Saved confirmation. The browser can sort by Date and Ideal BPM; a user pattern’s Ideal BPM can be edited.
Pattern Macros can be scoped to selected channels. Temp Save and Recall restore the editable grid, Mod Dials, lane lengths, macro state and LFO state.
Push’s Step & Random bank exposes step-count and mod-value ranges, with Rnd Steps and Rnd Mods for selected channels; hold Select to address all loaded channels. Per-lane random encoders use those ranges and preserve hand edits and protected lanes.
Fixed Select + pad mod randomising only working once. Repeated taps now replace their previous random batch while preserving hand edits. Mods made by the older faulty gesture may need clearing once before they can be re-rolled.
Push Delete gestures distinguish clearing notes from clearing mods. Delete + a blue channel button clears its mods and drawn shapes; Delete + a Mod encoder clears that lane. Clear operations remain undoable.
Fixed startup running before Live’s API was ready when reopening a saved Set, which could prevent the Drum Rack and saved mappings from reconnecting.
Added Push disconnect/reconnect detection and renewed takeover after Live rebuilds its control surface. Regression coverage passes; a hardware reconnect check is still pending.
The Advanced window offers 100%, 125%, 150% and 175% sizing. Help opens the interactive user manual, which is included beside the device for local access. The manual and interactive diagrams match this build.
v1.0.4
Export notes and mapped automation as a Live Clip (.alc) at programmed beat positions. Save your Live Set, choose Midi & Automation (.alc), then drag the generated file into Live’s empty track area. The saved instrument/effect chain is included without CE DRUMSEQ; there is no recording pass or temporary tempo change.
Automation exports are saved in the Current Project folder. The completion popup shows a readable track/pattern/BPM filename, and repeat exports add (2), (3) and so on without replacing earlier files. Save-required and completion messages stay in the view that started the export.
Fixed the Arrangement-import crash caused by an invalid frozen clip placeholder in early .alc exports. Create a fresh export with this build; already-generated files are not repaired automatically.
Export, mapping and confirmation popups now share a clearer design, with larger headings, readable text and amber accents for destructive actions. Progress notices and context menus use the same styling.
Condition choices now cover every standard A:B rule for two through eight passes, ending at 8:8. Older and macro-generated combined conditions still play, but are no longer selector choices.
MIDI Map in the Advanced window exposes the channel dials, mute/solo, step buttons, LFOs, cues and global controls. Step Edit lets mapped step buttons choose a step for the header knobs to edit; Cell assignments stay with their channel as you scroll or reorder it.
Built-in Launch Control XL mk2 and APC40 mkII layouts add step buttons, held-step editing, Chance/Condition knobs and Save/Recall combinations. The XL uses Factory Template 1; APC40 mkII shows two 16-step channels across its top four clip rows.
Multi-cell mapping edits now follow the focused cell consistently. Shift-select two or more Mod cells, then use Clear Selected Mod Cells to clear their step values together as one Undo action while keeping mappings, Mod Dials and Shapes.
Adding hits while Density is raised starts that channel’s preview from its programmed steps at the current dial position. Other channels keep their previews, and the starting points survive Set saves, cue recall and Undo.
Startup avoids repeated parameter scans and shows loading progress through the initial control updates. The final phase reaches 100% when those updates finish; early progress is labelled estimated.
The user manual, control help, search, interactive diagrams and in-device Help have been updated to match these changes.
v1.0.3
Sample & Hold can now be set for a single mod cell. Alt/Opt-click any M1–M6 cell, on the device or in the Advanced window, and choose Sample & Hold to hold just that lane on that channel. The Settings switch and the channel menu option still hold every lane, and the cell menu shows when one of them already does.
The Auto Map Filter Cutoff, Decay and Pitch items are gone from the mod cell menu. The Auto-Map button does the same job, for one lane or the whole rack.
New clears on the step menu. Alt/Opt-click a step for Clear Mods, which clears the lane that channel is showing across all its steps (the same as the Mods ✕), or Clear All Mods, which resets Velocity, Gate, Chance, Condition and all six mod lanes on the channel. The hits stay. Alt/Opt-click the Mods ✕ or the % and 1:1 buttons for Clear All Mods too. Undo takes either one back.
Chance and Condition now belong to the hit. Setting either one on an empty step adds the hit there, from the device, the Advanced window or a held Push pad. Removing a hit puts its Chance back to 100% and its Condition back to none, so a step you add again later starts fresh.
On Push, turning the Step bank's Chance or Condition with no pad held now only changes steps that have a hit.
Fixed a short doubled hit on the first beat each time an Arrangement loop wrapped around.
Auto-Map no longer wrongly reports that a parameter is held by a rack Macro.
A Remote mapping on a parameter that a rack Macro controls no longer keeps trying to move it in the background.
If Live's audio device is set to Off, Auto-Map now tells you it needs one instead of sitting at "Reading the rack… 0/16".
In the Advanced window, clicking a step on the Chance or Condition page no longer changes the main grid's lane as well, and the Mods ✕ on those pages now clears the lane you are looking at.
The manual covers all of the above, and the Push section now describes the View bank's parameter readout correctly: hold a pad and turn a mapped Mod encoder to see its Live parameter name.
v1.0.2
Symmetry now does what it says. All the way right, beats 3–4 repeat beats 1–2 exactly on every channel, kick and snare included. Turning it left makes beats 3–4 more and more different, right to the end of the dial. The change is spread across the whole dial instead of stopping halfway.
Syncopation has been rebuilt. The kick on beat 1 and the snare on 2 and 4 now stay put, and up to half of each channel's other hits are pushed a 16th or two early. Turning it further adds offbeat accent hits to the kick and snare. Before, the kick and snare only moved in the last tenth of the dial, and at full the whole kit just shifted a 16th early.
Syncopation no longer turns one hat or percussion channel down instead of moving it, so the Syncopation option in Settings › Pattern Macros is gone. Sets that committed those accents still play them.
Step mods now land with their note. A pitch or decay lock used to reach the sound a few milliseconds after the hit, and more when the computer was busy.
A parameter mapped in Remote mode is now held by the device while it is mapped: Live shows it greyed out, its automation pauses and changes make no undo steps. The value saved in your Set is not changed.
The Advanced window's playhead no longer freezes when you press Play after leaving the window open with the transport stopped.
Push pads: every step now lights in a strong colour, with no near-white ones. While the transport is stopped every hit shows at full brightness. A step with a mod but no hit is now a darker shade of its track's colour instead of a different bright colour.
v1.0.1
In the Advanced window, drag a step sideways on the Velocity or Gate lane to set its note length, just like on the main grid. Dragging sideways from an empty step adds a hit and stretches it, and the length shows on the step while you drag.
Shift-dragging across steps in the Advanced window now selects every step you pass over.
Clicking past the last step of a shorter row in the Advanced window no longer does anything.
Long notes on the main grid now draw as one solid block. Beat lines no longer cut through them.